Overview Reboot Node

Overview Reboot Node

The Reboot Node is used to automatically reboot an edge device in a certain time interval.

Input and Output
  1. Input: No input needed (mode: time), or any previous node (mode: message)
  2. Output: none
  3. Supported architecture: Currently supported on amd64 devices.
Node Parameters
The following parameters are used in the reboot node.

Name: Input the node name used in a specific flow.
  1. default: fall detection
  2. type: string
Trigger Action: Defines the trigger to reboot the device. Available triggers are time interval or messages from previous nodes.
  1. available: time interval, message
  2. default: time interval
If time is selected, you will be able to configure the interval mode (daily or weekly), the specific day and the reboot time. The default reboot time is 12h 0min 0sec (noon - 24h representation). All times are UTC.

    • Related Articles

    • Overview Fall Detection Node

      The Fall Detection Node detects and tracks the movement of people to identify if a person is falling. Input and Output Input: Group Keypoint Detection output message and stream Output: Fall detection message and stream Supported architecture: ...
    • Posture Recognition Node Overview

      The Posture Recognition Node detects and tracks the movement of people to identify a person's posture. Input, Output and Supported Architecture Input: Group Keypoint Detection output message and stream or Video Feed output stream Output: MQTT message ...
    • Overview Object Flow Node

      The Object Flow Node detects and tracks people from an input video stream to compose a heatmap and to calculate the average dwell time. Input and Output Input: Object Detection mqtt result message, ROI section definition, Object Counting result ...
    • Overview Object Counting Node

      The Object Counting Node is used to count one or multiple objects which are previously detected by the object detection node. Input and Output Input: MQTT message (results from object detection node) Output: MQTT message containing IN / OUT results ...
    • Overview Object Tracking Node

      The Object Tracking Node is used to track several objects which were previously detected by the object detection node across several frames.  Input and Output Input: Output of object detection node. Output: MQTT message containing the tracking ...